Time and temperature play a roll in Stain Blocker's thickness and settling in the bottom of the can. What you are seeing is some of the fillers coagulating.

This is normal as long as it is soft on the bottom; it does not diminish its quality or effectiveness. You should be able to reincorporate the contents of the can - use a paint mixer if necessary because it is a thick, heavy product. However, you should not see any hard settle at the bottom of the can.

All bright white paint will yellow slightly with time, with or without topcoat. Water-based topcoats are reactive and more likely to draw out substances in the wood such as tannins or unknown substances in existing finishes causing the topcoat to yellow. This is an industry-wide issue and we have added warning labels regarding the yellowing of topcoats to our bright white paints, Snow White Milk Paint and Chalk White Chalk Style Paint.

General Finishes background was originally on the professional side, and the incidences of yellowing topcoat over white paint were almost nil, and when our sprayable professional finish, Enduro White Poly, is used, there have been no incidences. But as the use of our paints has increased in the up-cycling and furniture refresh markets, we have heard more reports of our topcoat yellowing. Our original response was to teach about prepping, testing your finish schedule and finally creating Stain Blocker, our stain and tannin blocking primer, but this is not enough. Just as we advocate prepping all finishes, we are now advocating NOT using a clear water base topcoat over BRIGHT WHITE paint.

We are listening and General Finishes is in the process of developing a brushable version of our professional Enduro White Poly (available only in gallons), but that will take some time and rigorous testing before we can release the product. Here is what you should know to protect yourself and also some immediate suggestions to decrease chances of yellowing.

There is no way to reliably predict yellowing ahead of time. Sometimes yellowing occurs, sometimes it does not. Every existing finish is different and we rarely know the finishing provenance on an existing piece. Every tree is different and every piece of wood is unique. Wood can bleed tannins immediately after the topcoat dries or months later with a change in temperature that comes with a change in seasons. Oak, pine, mahogany, and Douglass Fur are particularly prone to bleed-through.

As is true of most "water-white" topcoats, our High Performance Water-Based topcoat is a clear drying finish over a non-reactive substrate such as plastic. When white paint sealed with a water-white topcoat is applied to something as unpredictable as wood, all bets are off and the reason is often unknown. Yellowing can be caused by the top coat activating the tannins in raw wood or aniline dyes, stains or contaminants in a pre-existing finish. This is most evident when using BRIGHT WHITE paint and most prevalent in the sculpted details of furniture, where the topcoat can collect, intensifying the color change to an unacceptable level.

To add to this issue, all bright white paint will yellow slightly with time, with or without topcoat. You have probably tried to touch up white woodwork in your home after several years and noticed that the new paint is brighter.

SUMMARY

• Whites have a lower “hide” quality and are more transparent than most other colors. Most bright whites require additional coats to achieve the desired color and minimize color variation. This can increase the cost of paint finishing. Always include a clause in your contracts addressing the need for additional coats to achieve coverage.
• Bright white paints can yellow over time with or without topcoat.
• The underlying finish or wood species can affect the final color of light paint.
• Details and inside corners are difficult to cover with any paint color, but this property tends to be more noticeable with whites. This is a naturally occurring phenomenon in paint application and does not necessarily constitute a defect in the paint finish or your technique.
• The more porous the paint (chalk paint vs an acrylic paint), the more likely that yellowing will occur. The topcoat is actually seeping through the spaces caused by the larger particles of filler that give chalk style paints their texture.

DO NOT CARRY THE COST OF WHITE PAINT YOURSELF – pass the cost on to the consumer who wants it with a fair upcharge. White paints, even if they did not yellow, require more coats to achieve coverage.

TIPS FOR PROTECTING YOURSELF AND PREVENTING YELLOWING

1. Use a disclaimer in your contracts or recommend a softer white such as Antique White or Linen. Upcharge for the extra coats needed and never guarantee a white finish over a piece that you cannot trace the provenance on. Here is a suggestion for your contracts: Terms of Agreement and Warranties: ________ (Initials) I have been informed that more coats are required when painting with bright whites, reds, greens or yellow. I understand that white paint can yellow over time and water-based topcoats can occasionally react with the substrate or existing finish under white paints causing yellowing, even is a stain blocking primer is used.
2. If it is a low use project, use a premium white paint that is self-sealing and does not require a topcoat. A clear top coat is not required on our Milk Paint for increased durability, as it is a self-sealing, exterior rated coating with very high durability and performance properties. However, top coats provide a smoother surface that is easier to clean and boost durability for high use projects such as table tops and kitchen cabinets.
3. Get a spray gun and use a professional "white coat" such as our Enduro White Poly. It is a white paint with "increased topcoat properties", is a stand-alone finish when 3 coats are applied and does not require sealing with a topcoat.
4. If you are still brushing, try a couple of our customer's techniques. 1) Add 10-15% of the paint you are using to the first application of topcoat. The last two layers of topcoat should NOT have paint in it, to maintain durability. This technique can be used with any color, not just white, and really boosts bright colors. 2) Use a coat of light gray over a lacquer based primer before applying white paint. We have good reports of these 2 techniques from customers BUT HAVE NOT TESTED IN OUR LAB. (Alternatively, GF prefers the use of Stain blocker without grey paint.)
5. Always test your project's ENTIRE finishing schedule (from cleaning to topcoat) on an inside door or a more hidden area of the piece. This does not help if the yellowing occurs later but you will at least know if there is an immediate problem.
6. Always apply a stain-blocking primer under white or light-colored paint such as GF Stain Blocker or a shellac based primer. Always let any primer dry overnight. Some of the primers we have seen suggest a 3-hour dry time and that is not enough.
7. If you are working on period pieces such as a 1940's serpentine mahogany desk which were often finished in stain containing aniline dyes that cast a pinkish bleed through under light paint, stay away from light colors. Not every piece of furniture is suitable for up-cycling with a light paint color. Pine, Mahogany, and furniture of the 1940's and 50's are a red flag.
8. Last, not all manufacturer's topcoats are compatible with other finishes and may react with a color change. Always follow best practices by not rushing, and testing to your satisfaction first.

A primer is your best defense under light-colored paint.

Another technique to avoid the slight color change that sometimes occurs when applying topcoat is to add 10-15% of the paint you are using to your topcoat. This technique layers additional coats of color over your piece as well as providing the protection of a topcoat. If you don't like measuring, just add enough paint until you can see a bit of the hue in the topcoat. This method works with a brush or a spray gun.

To maintain the full-strength protection of the topcoat, DO NOT TINT YOUR FINAL COAT of topcoat.

Remember, NEVER EVER paint an existing piece of furniture with a light paint without proper preparation AND a stain blocking primer. Topcoats can activate tannins in the wood, or dyes in the previous finish, causing yellow or pink bleed-through. We recommend General Finishes Stain Blocker, which has been developed specifically for upcycling furniture and has proven to be 100% effective when two coats are applied, or Zinsser BIN.

Here is a sample finishing schedule:

1. Prep clean and sand
2. Three coats of paint (or four if needed)
3. Two coats of topcoat mixed with 10-15% paint
4. One coat of topcoat

VIDEO: How to update or refinish cabinets and woodwork light paint color using a sprayer.